Welding Stainless steel pneumatic angle seat valve 4-20MA

Body: SS304,SS316,SS316L
Stem: SS304,SS316,SS316L
Pneumatic actuators:PA, stainless steel
Seats: PTFE
Ends: welding
Pressure:16bar
Air pilot pressure:0.6Mpa
Size: 3/8″ – 4″ (10mm – 100mm)
Ambient temperature: PA: -40 °C to + 60 °C ; stainless steel: -40 °C to + 80 °C
Control medium:Neutral gases, air
Temperature range: -40 °C to + 180 °C (depending on pressure, medium and material)







    Description

    Welding Stainless steel pneumatic angle seat valve 4-20MA is a cost-effective and efficient valve that provides high cycle life, operating safety, and maintenance-free spring loaded packing with intermediate relief and wiper. It features self aligning PTFE seal/plug, optical position indication standard, and low lifecycle costs. The body is constructed out of SS304, SS316, and SS316L while the stem is made from the same material. The pneumatic actuators are either PA or stainless steel depending on the requirements while the seat is crafted with PTFE. It can handle pressure up to 16bar with an ambient temperature range of PA: -40 °C to + 60 °C; stainless steel: -40 °C to + 80 °C and control medium such as neutral gases or air. The body style is Y type making it ideal for water, alcohol, oils, fuel, salt solution, alkali solutions, organic solvents or steam at 150 PSI / 365. To make sure your Welding Stainless steel pneumatic angle seat valve 4-20MA functions perfectly we also provide you with Pneumatic Actuator Control such as double acting, single acting normally closed or single acting normally open as well as accessories such as solenoid valve, limit switch box , filter, E/P positioner and hand wheel.

    1.High cycle life
    2.Cost effective ball valve alternative
    3.High operating safety:
    4.Maintenance–free spring loaded packing with intermediate relief and wiper
    Self aligning PTFE seal/plug
    Optical position indication standard
    5.Cost–savings in operation due to minimized control air consumption
    6.Low Lifecycle costs

    Description
    Body: SS304,SS316,SS316L
    Stem: SS304,SS316,SS316L
    Pneumatic actuators:PA, stainless steel
    Seats: PTFE
    Ends: welding
    Pressure:16bar
    Air pilot pressure:0.6Mpa
    Size: 3/8″ – 4″ (10mm – 100mm)
    Ambient temperature: PA: -40 °C to + 60 °C ; stainless steel: -40 °C to + 80 °C
    Control medium:Neutral gases, air
    Temperature range: -40 °C to + 180 °C (depending on pressure, medium and material)
    Body style: Y type
    Applications: Water, alcohol, oils, fuel, salt solution, alkali solutions,organic solvents,steam at 150 PSI / 365

    Pneumatic Actuator
    Control: Double acting,
    Single acting normally closed
    Single acting normally open
    Pneumatic accessories: Solenoid valve, limit switch box , filter, E/P positioner, hand wheel

    thread pneumatic angle seat valve

    welding Stainless steel pneumatic angle seat valve

    welding Stainless steel pneumatic angle seat valve