stainless steel air operated angle valve

Body: SS304,SS316,SS316L
Stem: SS304,SS316,SS316L
Pneumatic actuators:PA, stainless steel
Seats: PTFE
Ends: Thread BSP, BSPT, NPT
Pressure:16bar
Air pilot pressure:0.6Mpa
Size: 3/8″ – 4″ (10mm – 100mm)
Ambient temperature: PA: -40 °C to + 60 °C ; stainless steel: -40 °C to + 80 °C
Control medium:Neutral gases, air
Temperature range: -40 °C to + 180 °C (depending on pressure, medium and material)







    Description

    stainless steel air operated angle valve

    This stainless steel air operated angle valve is designed to provide high cycle life, cost effectiveness and optimum operating safety. Its maintenance-free spring loaded packing with intermediate relief and wiper, self-aligning PTFE seal/plug and optical position indication standard gives it the advantage of low lifecycle costs, making it a really worthwhile investment. With body components of SS304, SS316 or SS316L and stem components of SS304,SS316S or SS316L this durable valve offers high pressure control at up to 16bar as well as pneumatic actuator control (double acting, single acting normally closed or open). It is suitable for neutral gases, air and a wide range of temperatures (-40 °C to + 180 °C), media such as water, alcohols oils, fuel salt solution alkali solutionsand organic solvents. Further accessories such as the solenoid valve, limit switch box, filter E/P positioner and hand wheel can also be purchased to complete your setup. This product offers great value for money for its long service life and cost savings in operations due to minimized control air consumption.

    1.High cycle life
    2.Cost effective ball valve alternative
    3.High operating safety:
    4.Maintenance–free spring loaded packing with intermediate relief and wiper
    Self aligning PTFE seal/plug
    Optical position indication standard
    5.Cost–savings in operation due to minimized control air consumption
    6.Low Lifecycle costs

    Description
    Body: SS304,SS316,SS316L
    Stem: SS304,SS316,SS316L
    Pneumatic actuators:PA, stainless steel
    Seats: PTFE
    Ends: Thread BSP, BSPT, NPT
    Pressure:16bar
    Air pilot pressure:0.6Mpa
    Size: 3/8″ – 4″ (10mm – 100mm)
    Ambient temperature: PA: -40 °C to + 60 °C ; stainless steel: -40 °C to + 80 °C
    Control medium:Neutral gases, air
    Temperature range: -40 °C to + 180 °C (depending on pressure, medium and material)
    Body style: Y type
    Applications: Water, alcohol, oils, fuel, salt solution, alkali solutions,organic solvents,steam at 150 PSI / 365

    Pneumatic Actuator
    Control: Double acting,
    Single acting normally closed
    Single acting normally open
    Pneumatic accessories: Solenoid valve, limit switch box , filter, E/P positioner, hand wheel

    thread pneumatic angle seat valve

    stainless steel air operated angle valve

     

    stainless steel air operated angle valve


    FAQs

    What is a pneumatic angle seat valve?

    A pneumatic angle seat valve is a device used in pneumatic systems to control the flow of pressurized air. This type of valve offers precise control, resulting in less wear and tear on components in other parts of the system. It also helps conserve energy and reduce noise levels since it operates more smoothly than conventional valves due to its unique design. The most common type of angle seat valve has two sections: an upper section which houses the actual pneumatically-operable mechanism, and a lower section which houses the flow-control element – typically either a diaphragm or piston.

    The pneumatic angle seat valve is comprised of four main parts: body/housing, actuator/actuator plate, rod/stem assembly, pilot valve assembly, stem seal retainer/guide bushing and bonnet. The body serves as both a holder for all other components within the housing as well as providing support for external piping connections (inlet & outlet). The actuator plate allows for quick adjustment between open & closed positions while providing support to the operating system thus ensuring long-term reliable performance with minimal maintenance requirements.

    What are the applications of pneumatic angle seat valves?

    Pneumatic angle seat valves are a type of control valve used in the manufacturing, processing, and engineering industry for controlling the flow of gases or liquids. They are commonly used in applications that require frequent open/close cycles because they offer reliable service over long periods of time with minimal maintenance.

    The most common application for pneumatic angle seat valves is to regulate the flow of steam, air, and water in low-pressure systems such as heating and cooling air handling units. These valves can be found in industrial applications such as automating process streams by combining solenoid operation with a low-level voltage signal to create a module that supports modulating action which helps maintain constant pressure at a desired point when operating.

    Angle seat piston valve working principle

    An angle seat piston valve is a type of control valve that utilizes the motion of a sliding stem and diaphragm to modulate the flow of media. It uses pneumatic or hydraulic pressure to actuate the stem, which in turn moves the diaphragm and opens or closes the port to control flow. This type of valve has several advantages over traditional gate, ball, and globe valves including less space requirements due to its compact size, minimal maintenance since it only requires periodic lubrication for smooth operation, fast response time due to its flexible design with few moving parts, and precise regulation due to its direct sensing of upstream pressure variations.