CPVC pneumatic diaphragm valve
The CPVC Diaphragm Valve is a cutting-edge fluid control solution engineered to deliver exceptional performance in challenging industrial applications. This valve is crafted from chlorinated polyvinyl chloride (CPVC), a robust and chemically resistant material that can endure exposure to corrosive fluids and demanding environments. The pneumatic actuator ensures precise control over valve opening and closing, making it a perfect choice for critical flow control applications.
The diaphragm valve guarantees excellent leak-tightness, ensuring consistent and accurate performance even under high-pressure conditions. Moreover, the CPVC material used in construction enables this valve to operate efficiently in high-temperature applications up to 200°F.
The Pneumatic Diaphragm Valve is suitable for a broad range of industrial applications, including chemical processing, water treatment, and semiconductor manufacturing. Its sturdy construction, superior control capabilities, and ability to withstand extreme conditions make this valve an indispensable component in any sophisticated industrial fluid control system.
Size: 1/2″ – 10″ (15mm – 250mm)
Body: UPVC, CPVC, PPH, Clear PVC, PVDF
Diaphragm Material : EPDM,EPDM+PTFE
Max working pressure : 150psi
Max working temperature: UPVC(5~55℃); CPVC & PP(5~90℃)
ASME B16.34 class 150
DIN PN10 PN16
JIS 5K 10K
Output Torque 10Nm to 8000 Nm
Control: Double acting,Single acting normally closed, acting,Single normally open
Pneumatic accessories: Solenoid valve, limit switch box , filter, E/P positioner, hand wheel
All double acting and spring return units are suitable for both on/off and throttling applications. Actuators which can be actuated with other media such as hydraulic oil or water are also available as an option.
1, Two independently adjustable travel stop screws and a cam on the output shaft to permit precise bidirectional adjustment of movement in both the open and closed positions for quarter turn valves (+5° to -5° limit adjustment)
2, Integral porting
3, Standard units have anodized aluminum bodies with polyester coated end caps.
4, Special coatings and materials available for corrosive environments
5, NAMUR accessory compatible
|9||COMPRESSOR PIN||SUS 304||1|
|11||GREASE NIPPLE||C3602 2-1/2″~8″||1|
|13||INSERTED NUT||C3602,SUS304,SUS316||2-1/2″~4″—8 SET|
|15||THRUST RING & BEARING)||PTFE 1-1/2″~3″,SUS 4″~8″||1|
|17||SET NUT||SUS 304||1|
|20||SHEET RING||SUS 304||1|